Camera Mounts
 

 

Customize your installation.

EMI Camera Mounts deliver sturdy, cost-effective support for cameras in indoor applications.

You gain the flexibility to design your installation for maximum effectiveness. Mounting options include wall, ceiling, drop ceiling, and deck.

We also offer unique temporary mounting solutions, using magnetic and clip base components. And all EMI camera mounts are easy to install and adjust, for optimum performance.

 
CCUFM-M-K

Magnetic Base Camera Flex Mount

The CCUFM-M-K Universal Flex Mount can be used with most cameras and can support a combined camera lens weight of 3 lbs. It is designed to be used primarily as a temporary mount and can be attached to any flat steel surface by a magnetic base with an 80 lb. straight pull. With no drilling or fastening hardware required, this simple, lightweight mount assures quick and easy installation. The unit is furnished with a steel tether cable to prevent the camera from falling. Due to its flexibility and maneuverability this mount allows the camera and lens to be placed at practically any angle.

CCUFM-M-K

FEATURES & ADVANTAGES

  • Quick and easy installation and removal
  • Tether cable prevents camera from falling
  • Unlimited camera positioning

SPECIFICATIONS

Application: Temporary camera mount

Dimensions: Approximately 8-1⁄2" long

Material: Flexible ABS plastic segments with 80 lb. rated magnetic base

Maximum Recommended Load: Flex segments can support camera/lens weight up to 3 lbs.

Color & Finish: Black

OPTIONS & ACCESSORIES

Replacement 7pc ABS Flex Segment: 340-000076

Replacement 1pc ABS Flex Segment: 340-000073

DOWNLOADS

CCUFM-C-K

Clip Base Camera Flex Mount

The CCUFM-C-K Universal Flex Mount can be used with most cameras and can support a combined camera lens weight of 3 lbs. It is designed to be used primarily as a temporary mount and can be attached to countless locations by its heavy duty spring clip base. With no drilling or fastening hardware required, this simple, lightweight mount assures quick and easy installation. The unit is furnished with a steel tether cable to prevent the camera from falling. Due to its flexibility and maneuverability this mount allows the camera and lens to be placed at practically any angle and is workable on many unusual surfaces. Also available with additional protection on jaws and handles with durable rubber:
CCUFM-PC-K.

CCUFM-C-K

FEATURES & ADVANTAGES

  • Quick and easy installation and removal
  • Tether cable prevents camera from falling
  • Unlimited camera positioning

SPECIFICATIONS

Application: Temporary camera mount

Dimensions: Approximately 8-1⁄2" long

Material: Flexible ABS plastic segments with a steel spring clip

Maximum Recommended Load: Flex segments can support camera/lens weight up to 3 lbs.

Color & Finish: Black

OPTIONS & ACCESSORIES

Replacement 7pc ABS Flex Segment: 340-000076

Replacement 1pc ABS Flex Segment: 340-000073

DOWNLOADS

CCUFM-BS1-M-K

Magnetic Base Camera Tilt Mount w/ Ball Socket Head

The CCUFM-BS1-M-K is a short version of the CCUFM-M-K with a BS-1 ball socket camera mounting head. Designed primarily to support camera installations for ATMs, it can be used with most cameras and will hold a combined camera lens weight of 20 lbs. It can be attached to any flat steel surface by a magnetic base with an 80 lb. straight pull. With no drilling or fastening hardware required, this simple, lightweight mount assures quick and easy installation.

CCUFM-BS1-M-K

FEATURES & ADVANTAGES

  • Low profile designed for ATM surveillance use
  • Quick and easy installation and removal
  • Swivel head ball socket

SPECIFICATIONS

Application: Temporary camera mount

Dimensions: Approximately 4" long

Material: ABS plastic segments with 80 lb. rated magnetic base

Maximum Recommended Load: Ball socket can support camera/lens weight up to 20 lbs.

Color & Finish: Black

OPTIONS & ACCESSORIES

Replacement 3/32 Allen Wrench: 340-000093

Replacement 1pc ABS Flex Segment: 340-000073

Replacement Ball Socket Mount: BS-1-K

DOWNLOADS

TBS-1-3-K & TBS-1-6-K

Ceiling T-Bar Camera Mount

The Ceiling T-Bar Mount is a ball socket that installs easily on T-Bar ceiling grid. The TBS-1-3-K includes a 1-1/4" extension and the TBS-1-6-K includes a 3-5/8" extension to provide various additional clearance between the ceiling and the camera. Both models allow for simple and rapid installation, removal or relocation of a camera. An optional hanger wire above the ceiling stabilizes and supports the camera weight. Installation is completed in four easy steps by slipping the open clip over the T-Bar. Snap the clip together, screw the ball socket to the stud on the clip and attach camera.

TBS-1-3-K & TBS-1-6-K

FEATURES & ADVANTAGES

  • Easily installed, relocated or removed
  • Lightweight
  • Wide adjustment range with 3/32 Allen wrench

SPECIFICATIONS

Application: Ceiling T-Bar installation of a camera

TBS-1-3-K Dimensions: Camera is 2-3⁄4" from mounting surface

TBS-1-6-K Dimensions: Camera is 5-3/4" from mounting surface

Material: Aluminum

Maximum Recommended Load: 20 lbs.

TBS-1-3-K Color & Finish: Black ball socket, extension clear anodized aluminum

TBS-1-6-K Color & Finish: Black ball socket, extension clear anodized aluminum

OPTIONS & ACCESSORIES

Replacement 3/32 Allen Wrench: 340-000093

Replacement Ball Socket Mount: BS-1-K

BS-1-6-W/P

1" Swivel Head Ball Socket

The BS-1-6-W/P is a 1" swivel head ball socket with a 4-5/8" extension and wall plate designed to be installed on a single gang box. The mount is a universal head ball socket designed for tamper-resistant mounting of cameras. The mount head is adjustable from a level position to a tilt angle of 90°, rotates 360° and locks in any position with an Allen set screw. The socket can be adapted to almost any equipment that requires a wide range of movement by removing the washers and a hardened steel stud. The 4-5/8" extension provides additional clearance between the wall and the camera. Maximum recommended balance load is 20 lbs.

BS-1-6-W-P

FEATURES & ADVANTAGES

  • Wide adjustment range with 3/32 Allen wrench
  • Tamper-resistant
  • Easily install to a single gang box or directly to wall
  • Cable pass hole in wall mount plate for box mounting

SPECIFICATIONS

Application: Indoor camera mount

Dimensions: 6" high

Material: Aluminum

Maximum Recommended Load: 20 lbs.

Color & Finish: Black ball socket, extension clear anodized aluminum, wall plate brushed stainless steel

OPTIONS & ACCESSORIES

Replacement 3/32 Allen Wrench: 340-000093

Replacement Ball Socket Mount: BS-1-K

CCWM-6-W

6" Camera Wall Mount w/Ball Socket Head

The CCWM-6-W is a 6" wall mount with a BS-1-K universal ball socket mounting head. The mount’s wall flange is designed to attach to a single gang box or directly onto the wall. The wall plate has a 5⁄8" cable pass cutout to allow cabling to pass directly into the gang box, preventing the need to drill additional holes in the wall. The mount will accommodate camera/lens combinations up to a maximum weight of 8 pounds.

CCWM-6

FEATURES & ADVANTAGES

  • Easily install to a single gang box or directly to wall
  • Cable pass hole in wall mount plate for box mounting

SPECIFICATIONS

Application: Camera wall mount

Dimensions: Arm extends 6" from wall; ball socket is 1-5/8" high

Material: Steel

Maximum Recommended Load: Can support camera/lens weight up to 8 lbs.

Color & Finish: White textured hard powder-coat paint

OPTIONS & ACCESSORIES

Replacement 3/32 Allen Wrench: 340-000093

Replacement Ball Socket Mount: BS-1-K

DOWNLOADS

* Product Subject to Minimum Order Quantities